Talos Security IPC311-W 720P Manual - Manual (Page 21)

IP Camera User’s Manual
|
saved, click button to query whether the setting is successful; click button to exit
current interface.
[Alarm Schedule]: After enable this function, set the period of motion detection, four periods allowed.
Alarm schedule can be copied to the other d ate, select “Weekday” to the date or everyday which set
as the same settings.
[Output]: Enable or disable linkage alarm output.
[Linkage Output(s)]: Set the duration of linkage alarm output after being triggered (in seconds), the
range of alarm duration is 1~10s.
[Record]: When motion alarm is triggered, it will record and store the video in the SD card on device.
The record files can be saved via E-mail sending or FTP uploading.
[Linkage Mode(s)]: Set the duration of linkage recording after being triggered (in seconds), range
from: 5/10/30/60/120/300/600/900/1200/1800s.
[Capture]: When motion alarm is triggered, it will snap pictures and store them in the SD card on
device. The captured pictures can be saved via E-mail sending or FTP uploading.
[Capture Pictures]: Set the amount of linkage capture after being triggered, the number of pictures
snapped is from 1 to 10. If the number is set as 10, and the snapping interval is 1 second, that means
when there is an alarm, 10 pictures will be snapped at one time and the interval between each picture
is 1 second.
[E-mail]: Enable E-mail function; when motion alarm is trigged, a notification email will be sent to
user’s designed email box including trigger events, time, capture pictures, and device name, etc. User
can select only sending text messages or sending text and image messages.
Details about E-mail setting please refer to [E-mail Configure].
[FTP]: Enable FTP function; when motion alarm is trigged, the alarm information of motion detection
will be saved in the way of FTP uploading. User can select only sending text messages or sending text
and image messages.
[Alarm Sound]: Close or open the alarm ringing.
[Ring Duration Time(s)]: After opening the alarm ringing, set the duration of alarm ringing after
being triggered (in seconds), the range of alarm ringing is 1~10s.
Click button to save the setting; when the setting is not saved, click
button to return to the previously saved parameters; when the setting has been saved, click
button to query whether the setting is successful.
5.9.2 I/O
The interface of I/O alarm configure is shown in Fig 19: