Talos Security IPC311-W 720P Manual - Manual (Page 43)

IP Camera User’s Manual
|
Left Slip to Display PTZ Control Button
Control the directions of the camera
/
Zoom in / Zoom out
Change focus and aperture
7.3.3 Add Device
If this is the first time to use ISS MOBILE app, you need to put in all the information needed. Steps
as below:
 Click “ ” to access “Device List” interface, the list is blank as this time.
 Click “ ” on “Device List” on bottom left to access “Detail” interface, like Fig 46 as below:
Fig 46
Device Name: The names of equipment, which can help you identify different devices, for
examples, you can type the names based on the location of the equipment. The name will be
showed on the topside title bar of display interface.
Address: DVR IP address (Must be an Internet address) or DDNS.
Port: It means mobile phone port, and you can acquire port number in the setting information of
the device. Please use the fixed port: 554 here.
User Name: The user name of terminal device.
Password: The password of terminal device, match with user name.
Max Channel: The channels of your DVR supported, 32 channels max.
After editing, please click “Save” to save the information. Click “Back”, turn back to “Device
List”, you will see the name, channels, address, etc, like Fig 47 as below: