beautypg.com

SDC S6100 SERIES REVERSIBLE PANIC/FIRE EXIT User Manual

Page 16

background image

P:\INSTALLATION INST\Mechanical Hardware\INST-S6800.vsd Rev -

12/10 Page 4

B. ASSEMBLE RODS AND LATCHES

1. Screw bottom rod into bottom latch assembly (figure 2-1).

2. Assemble top rod:

2-1 Connect short top rod to long top rod using rod connector (figure 2-1).
2-2 Measure and cut the length of the top rod if it is too long.

2-3 Insert shaft connector into the non-threaded end of the top rod and tighten screw
to fix in place (figure 2-3).

3. Screw top rod assembly into top latch assembly (figure 2-4).

Shaft connector

Non-threaded

End of top rod

Non-threaded

End of top rod

Top latch

assembly

Top rod

assembly

Figure 2-4

Figure 2-3

Figure 2-2

Figure 2-1

Bottom latch

assembly

Bottom rod