Memmert INCO 246/246 med CO2 Incubators (Generation 2003) - Manual (Page 39)

39
Operation and control
5.12 Ending operation
1. Switch off appliance. To do this, press the
main switch on the operating panel so
that it clicks into place in the appliance
(see Fig. 22 ).
2. Close the valve(s) of the gas bottle(s).
3. Open the door (see page 27 ).
4. Remove the chamber load.
5. For appliances with the basic model:
Remove and empty the water trays. Fill
water trays and insert them only when
the appliance is next used.
For incubators with a humidity module,
empty the water tanks if the incubator is
not used for several days.
Fig. 22 Switching off incubator