Memmert INCO 246/246 med CO2 Incubators (Generation 2003) - Manual (Page 34)

34
Operation and control
Weekday
Adjustment range:
Monday to Sunday
Mo Tu We Th Fr Sa Su
Day groups
Adjustment range:
Working days Mo-Fr
Weekend Sat-Sun
Mo Tu We Th Fr Sa Su
Mo Tu We Th Fr Sa Su
No switch on time: ----
Appliance not switched on on this day
on
off
Switch on time (on)
Adjustment range:
00:00 to 23:59 hours
on
off
h
Switch off time (off)
One minute beyond the switch on time up to
24:00
on
off
h
By turning further to the right, parameters (temperature, humidity setpoints etc.) can be
selected as in the normal operating mode.
If no settings (temperature setpoint etc.) are made for the ON phase, the controller takes
over the values from the normal operating mode.
For reasons of safety, you should always check that only one switch one time is programmed
in the desired time blocks and days. By turning further to the right, parameters (temperature
setpoint etc.) can be selected as in the normal operating mode.
If the controller is in standby mode or the week time switch is in the ON phase, the tempera-
ture setpoint can be directly accessed by briefly pressing the SET key. By turning the control to
the right, you are returned to temperature monitoring, humidity and CO
2
setting. By turning
to the left, you come back to the settings for the individual time blocks.