Memmert INCO 246/246 med CO2 Incubators (Generation 2003) User Manual
Page 3
3
About this manual
About this manual
Purpose and target group
This manual describes the setup, function, operation and maintenance of CO
2
incubators
of the types INCO and INCOmed with a chamber volume of 108, 153 and 246 litres. In this
manual, the term INCO is used for INCO as well as INCOmed for the purpose of simplification.
Distinctions are explicitly pointed out.
This manual is intended for use by the trained staff of the operator in charge of operating
and/or maintaining the incubator. If you are asked to work on the incubator, you should read
this manual carefully before starting work on the unit. Familiarise yourself with the safety
regulations. Only perform the work that is described in this manual. If there is something you
don't understand, or certain information is missing, ask your superior or get in touch with the
manufacturer. Do not do anything without authorisation.
Contents
The INCO incubator is available with different fittings: as a basic model, and with six different
additional modules. The technical fittings and functional range of the basic model and the
individual additional modules are described from page 11 .
If specific equipment features or functions are available only with one of the additional mod-
ules, this is pointed out in the relevant sections in this manual.
Due to individual fittings, depictions in this manual may be different from the actual appear-
ance.
Other documents that you must read:
►
for service and repair work (see page 63 ) – a separate service manual
Storage and Forwarding
This instruction manual belongs with the incubator and should always be stored so that those
who work on the incubator have access to it. It is the responsibility of the operator to ensure
that persons who work on or who will work on the incubator are informed as to the wherea-
bouts of this instruction manual. We recommend that it is always stored in a protected loca-
tion close to the incubator. Make sure that the instruction manual is not damaged by heat or
damp. If the incubator is sold on or transported and then set up again at a different location,
this instruction manual must go with it.