Lenze E94AYCDN User Manual
Devicenet, Ä.n+öä
Table of contents
Document Outline
- E94AYCDN (DeviceNet™)
- Contents
- 1 About this documentation
- 2 Safety instructions
- 3 Product description
- 4 Technical data
- 5 Installation
- 6 Commissioning
- 7 Data transfer
- 8 Monitoring
- 9 Diagnostics
- 10 Error messages
- 10.1 Short overview of the DeviceNet error messages
- 10.2 Possible causes and remedies
- DeviceNet: Memory: Error when reading [0x00c85532]
- DeviceNet: Memory: Error when writing [0x00c85533]
- DeviceNet: Restart by watchdog reset [0x00c86010]
- DeviceNet: Internal error [0x00c86011]
- DeviceNet: Internal error [0x00c86101]
- DeviceNet: Internal mapping error [0x00c86110]
- DeviceNet: Invalid parameter set [0x00c8641f]
- DeviceNet: Error: Lenze setting loaded [0x00c86420]
- DeviceNet: Idle mode [0x00c88132]
- DeviceNet: Timeout I/O Connection [0x00c88111]
- DeviceNet: Explicit Message Timeout [0x00c88112]
- DeviceNet: Communication error [0x00c88121]
- DeviceNet: Online [0x00c88141]
- DeviceNet: Consumed I/O data length is contradictory [0x00C88211]
- DeviceNet: Produced I/O data length is contradictory [0x00C88212]
- 10.3 DeviceNet error messages
- 11 Parameter reference
- 11.1 Communication-relevant parameters of the standard device
- 11.2 Parameters of the communication module for the MXI1 slot
- C13231 | Service code
- C13489 | Service code
- C13531 | Service code
- C13789 | Service code
- C13850 | All words to scanner
- C13851 | All words from scanner
- C13852 | All words to the basic device
- C13853 | All words to the basic device
- C13854 | Length of ports mapped into receive PDO
- C13855 | Length of ports mapped into send PDO
- C13861 | Module state
- C13862 | Network status
- C13863 | Baud rate
- C13864 | Active MAC ID
- C13880 | Response in the case of comm. fault
- C13883 | Data length of consumed I/O data
- C13884 | Data length of produced I/O data
- C13885 | Delete process data
- C13900 | Firmware: Product type
- C13901 | Firmware: Compilation date
- C13902 | Firmware: Version
- C13920 | Display: DIP switch position
- 11.3 Parameters of the communication module for the MXI2 slot
- C14231 | Service code
- C14489 | Service code
- C14531 | Service code
- C14789 | Service code
- C14850 | All words to scanner
- C14851 | All words from scanner
- C14852 | All words to standard device
- C14853 | All words from standard device
- C14854 | Length of ports mapped into receive PDO
- C14855 | Length of ports mapped into send PDO
- C14861 | Module state
- C14862 | Network status
- C14863 | Baud rate
- C14864 | Active MAC ID
- C14880 | Response in the case of comm. fault
- C14883 | Data length of I/O data consumed
- C14884 | Data length of produced I/O data
- C14885 | Delete process data
- C14900 | Firmware: Product type
- C14901 | Firmware: Compilation date
- C14902 | Firmware: Version
- C14920 | Display: DIP switch position
- 11.4 Table of attributes
- 12 Implemented DeviceNet objects
- 12.1 Identity Class (0x01 / 1)
- 12.2 DeviceNet Class (0x03 / 3)
- 12.3 Assembly Class (0x04 / 4)
- 12.4 Connection Class (0x05 / 5)
- 12.5 Acknowledge Handler Class (0x2B / 43)
- 12.6 Lenze Class (0x65 / 101)
- 12.7 Lenze Class (0x66 / 102)
- 12.8 Lenze Class (0x67 / 103)
- 12.9 Lenze Class (0x68 / 104)
- 12.10 Lenze Class (0x6E / 110)
- 12.11 Examples for reading/writing with the »Class Instance Editor«
- 13 DIP switch positions for setting the station address
- Index
- Your opinion is important to us
- Contents