Lenze E94AYCDN - Manual (Page 67)

Lenze · E94AYCDN communication module (DeviceNet™) · Communication Manual · DMS 5.0 EN · 02/2014 · TD17
67
12 Implemented DeviceNet objects
12.1 Identity Class (0x01 / 1)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12.1 Identity Class (0x01 / 1)
This object contains some information regarding the identification and general information
relating to the device.
Instance 1
Services
Attribute Service(s) Designation Data type Value
1 GET Vendor ID UINT 445 (0x1BD)
2 GET Device Type UINT 0 (generic)
3 GET Product Code UINT 9400 (0x24B8)
4 GET Revision Struct of
Major Revision USINT 1 (0x01)
Minor Revision USINT 1 (0x01)
5 GET Status WORD Depending on the current
state of the communication
module
6 GET Serial number UDINT Individually for the
respective communication
module
7 GET Product Name SHORT_STRING E94AYCDN
10 1) GET / SET Heartbeat interval USINT 0 ... 255 s (0x0 ... 0xFF)
Lenze setting:
0 s (0x0)
1) The device commands "Load Lenze setting", "Save start parameters", and "Load start parameters" do not have an
effect on this attribute.
Service code Designation Description
0x05 Reset Reset of the communication module
0x0E Get_Attribute_Single Reading an attribute
0x10 Set_Attribute_Single Writing an attribute