Lenze E94AYCDN - Manual (Page 42)

9 Diagnostics
9.2 Polling the current module status
42
Lenze · E94AYCDN communication module (DeviceNet™) · Communication Manual · DMS 5.0 EN · 02/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
9.2 Polling the current module status
C13861 / C14861 shows the current module status of the DeviceNet node:
9.3 Polling the current network status
C13862 / C14862 shows the current network status of the DeviceNet node:
Value
C13861/C14861
Module status Description
0 Nonexistent No online value available (communication module is offline).
1 Device Self Test The communication module is currently undergoing a self-test.
2 Device Operational The communication module is working perfectly.
3 Device in Standby The communication module has not been completely configured yet
or the configuration is incorrect.
4 Minor Fault The communication module has a fault that can be rectified.
5 Unrecoverable Fault The communication module is defective and must be replaced.
Value
C13862/C14862
Module status Description
0 Nonexistent No online value available (communication module is offline).
1 Not online • The communication module is not supplied with voltage via
DeviceNet.
• The Duplicate MAC ID test has not been completed yet.
2 Link OK The communication module is working perfectly and has established
a connection to the scanner.
3 Online /
Not connected
The communication module
• is working correctly;
• has performed the Duplicate MAC ID test;
• has not been connected to the scanner yet.
4 Minor Fault The communication module has a fault that can be rectified.
5 Critical Link Failure The communication module cannot access the fieldbus (e.g.
Duplicate MAC ID, Bus Off, invalid baud rate etc.).