Leica Biosystems ASP200 S - Manual (Page 8)

8 Instructions for Use V 1.4, RevE – 03/2013
The instrument has been designed so that it is
safe to use by the operator as well as for pro-
cessing specimens – provided that it is operated
according to the present Operating Manual. The
Leica ASP200 S is a modular automated tissue
processor designed for the following laboratory
applications:
• Fixation
• Dehydration
• Paraffin infiltration
of histological tissue specimens.
The Leica ASP200 S must be operated exclusively
with the reagents listed in Chap. 3.5 - "Compatible
reagents" .
• The Leica ASP200 S may be operated by
trained laboratory personnel only.
• All laboratory personnel designated to oper-
ate this instrument must read these Instruc-
tions for Use carefully and must be familiar
with all technical features of the instrument
before attempting to operate it.
1.2 Qualification of personnel
1.3 Intended use of instrument
1.4 Instrument type
1. Important Information
Any other use of the instrument is con-
sidered improper.
Failure to adhere to these instructions
may result in an accident, personal
injury, damage to the instrument or
accessory equipment.
Proper and intended use includes
compliance with all inspection and
maintenance instructions, along with
the observance of all instructions in
the Instructions for Use.
All information provided in these Instructions for
Use applies only to the instrument type indicated
on the cover page.
A nameplate indicating the instrument serial
number is attached to the rear side of the in-
strument. (The serial number is also displayed
above the loading door on the front side of the
instrument.)
Fig. 1
Fig. 1 is provided as an example only
and shows a valid nameplate for this
instrument with the necessary in-
formation about instrument type and
power requirement. The precise data
for the various versions is specified in
Chap. 3.2 "Technical data" .