Leica Biosystems ASP200 S - Manual (Page 35)

35 Leica ASP200 S
4. Instrument Setup
4.9 Checklist for initial operation
Parameter selection
Set warning values for the age of the carbon
filter and the operating hours of the pressure
air pump.
Enter the instrument name and select the lan-
guage.
Optionally, set up the printer.
Here, configure all the parameters as required,
particularly the wax bath temperature.
Check that the date and time are correct.
Enter the desired reagents and the threshold
values for the CHANGE REAGENT warning.
Assign a reagent to each station (bottle).
Fill the reagent containers.
Remote filling (SMART SCREENS)
Manual filling (REAGENT STATUS)
Create the required programs.
Both infiltration and cleaning programs can be
copied and modified.
Assign your favorite programs to the Favorites
menu and, if desired, assign the end time and a
symbol for these programs.
Screen display
→
Press button
→ →
→ →
→ →
→
or
→ →
→ →
→
→
→ →
→ →
Fig. 19
When the instrument is prepared to the point where it can be switched on, the menus listed
below have to be opened and the corresponding parameters configured.
For detailed instructions about the individual parameters, refer to the online help.