Leica Biosystems ASP200 S - Manual (Page 67)

67 Leica ASP200 S
5.4 Reagent status
This window ( Fig. 77 ) is used to display and update the current reagent
status of the stations. In addition, reagent stations can be marked as
full or empty here.
→
Fig. 77
The following is displayed:
• The current age of each reagent
• The current status of each station
• Criteria that trigger warning mes-
sages
(fields highlighted in red)
To change the status of a reagent,
highlight the corresponding row and
press the button symbol for the re-
spective action.
In addition, you can switch directly
to the REAGENTS and STATIONS
windows to make current changes.
Reagent warning messages
If the RMS is active, warning messages are out-
put if reagents are used for too long.
The output of the warning messages can take
place after up to 3 criteria for normal reagents
and after up to 6 criteria for paraffins.
Warning messages are displayed at the end of a
cleaning program. Then, you can switch directly
to the REAGENT STATUS display.
Warning messages also appear (with a yellow
background) in the windows in which programs
are started.
The criteria for warning messages
For normal reagents, it is the number of the fol-
lowing since the last reagent change:
• Edited blocks
• Run programs
• Days passed
For paraffins, warning messages can also be
output according to the number of the following
since the last paraffin cleaning:
• Edited blocks
• Run programs
• Days passed
5. Operation