beautypg.com

7 connecting the water supply, 8 air monitoring assembly instructions, Section 3.7 – INFICON CMS5000 Monitoring System User Manual

Page 28

background image

3 - 8

IP

N 07

4-

50

8-

P1

C

CMS5000 Operating Manual

Figure 3-9 Standoffs for Overflow

3.7 Connecting the Water Supply

If not using the CMS5000 for water monitoring, skip this section.

It is the responsibility of the integrator to configure any and all plumbing. Care
should be taken to support the weight of all plumbing hoses and hardware
independently of the CMS5000.

3.8 Air Monitoring Assembly Instructions

The CMS5000 easily converts to a continuous Air Monitoring System via two
configurations. The first configuration, designed for ambient air sampling, requires
the user to replace the water collection tube with a air collection tube with attached
filter. The filter at the opening of the collection tube prevents large particulates in
the sampling environment from entering the system.The second configuration is
designed for in-line air sampling. This configuration is more complex.

Standoffs

Wingnuts