INFICON CMS5000 Monitoring System - Manual (Page 127)

11 - 21
IP
N 07
4-
50
8-
P1
C
CMS5000 Operating Manual
Figure 11-35 Change Password Window
4 In order to change the password, the correct current password must be entered
in the Old Password box. The Old Password box must be left blank if entering
a password for the first time. The new password must be entered in both the
New Password and Verify New Password boxes. Press OK to set the new
password, or press cancel to exit without resetting the password.
5 Click OK to close the Change Access Level window.
NOTE: CMS IQ remembers the last access level when closed. Upon
re-opening the program, the system will default to the last access level
utilized. If a password has been set, the user will be required to enter
the correct password for advanced access. If the password is not
known, the user can select normal access and continue.
11.2.6 View Menu
The View menu is shown below. It is used to select the desired toolbars.
Figure 11-36 View Menu
The Main Toolbar is shown below. It will be displayed when selected in the View
menu and is a default setting. See
Figure 11-37 . See Table 11-1 on page 11-23 for
Icon Descriptions.
Figure 11-37 Main Toolbar