EZWatch Pro 4.0 - Manual (Page 9)

8 | Page Quick Start Guide
2.2 Hardware Installation
2.2.1 Installing the EZWatch Pro Capture Card
■
Step 1
Turn off your PC.
■
Step 2
Insert each capture card into an available PCI slot on your motherboard.
Fig. 3. Inserting a capture card into a PCI slot
► Note Each Professional Grade Capture Card includes an internal audio
connection cable. This cable connection is not required if you do not
intend to use the audio feature of the EZWatch Pro software. Instructions
on installing the internal audio cable are listed below.
► Note No audio cable connection is needed if you are using the Business
Grade Capture Card, as it is already built-in.
■
Optional (Professional Grade Only)
Connect one end of the internal audio cable to the
OUT connection of the capture card.
Fig. 4. Connecting an internal audio cable to a capture
card