EZWatch Pro 4.0 - Manual (Page 58)

Page | 57 Software User Manual
Maximum Users Unlike the Remote Live Viewer, each person connecting to view the cameras
uses a single Connection (No matter how many cameras they play back). The default limit is 8
users connected and playing back clips simultaneously.
Save Log This allows you to specify the name of the log file and the location it is stored within
the PC.
Use Default Web Server If you want to view the cameras using the Internet Explorer web
browser you will need to check this box. If this box is not checked then you can only connect
using the Remote Live Viewer software from the installation CD. The default web port is 80.
► Note If you change the web port to anything other than 80, then you must
place the port at the end of the web address. For example, if your web
address is normally http://username.ezwatchip.com/ and you change
the web port to 8000, you would connect by typing in http://username.
ezwatchip.com:8000/ .
3.16.2 Black/White List Tab
The Black/White list for the Remote Playback Server functions identically to that of the Remote Live
Viewer. For additional details on how to use this feature, see 3.16.2 Black/White List Tab on Pg. 57 .
3.16.3 Performance Tab
The Performance tab for the Remote Playback Server functions identically to that of the Live Streaming
Server. For additional details on how to use this feature, see 3.16.3 Performance Tab on Pg. 57 .
3.17 3GPP Server
The 3GPP server is designed to allow access to the live video stream from a mobile device, most
commonly cell phones or PDA devices. Please note that not all cellular phones support this feature!
For a Cellular Device to be able to connect and view the cameras remotely, it must meet three
important criteria:
•
The device MUST support the 3GP Video format.
•
The device MUST support Real-Time Streaming Protocol (RTSP).
•
The device MUST be connected to a 3G Cellular network.
If all 3 criteria are met, then you should be able to connect and view your cameras on your mobile
device by going to the address of the system from within your device. An example URL is: rtsp://
mycameras.ezwatchip.com:554/mediaXX.3gp
The 'XX' portion of the URL can be set to which camera you want to view, with 00 corresponding to
Camera One and 03 corresponding to Camera Four.
► Note If you are unsure whether or not your cellular device meets all three
criteria, contact the device manufacturer and your cellular network
provider.
3.17.1 Main Tab
The main window allows you to see how many users are currently connected, how many cameras are
being viewed, and allows you to configure the port being used.