EZWatch Pro 4.0 - Manual (Page 114)

Page | 113 “How To” Guides
■
Step 6 Now return to the PTZ Config settings in your EZWatch Pro software to enter the proper
Com Port. The Baud Rate should be set to 2400. The Address should be set to Addr:01. You can also
adjust the Advanced Settings to your preference.
Fig. 150. PTZ Control Panel
■
Step 7 On the Main Console, double-click on the video feed for your PTZ camera. Assuming they
are powered and their addresses have been properly set, you can now control the PTZ camera by
utilizing the PTZ Control Panel.