EZWatch Pro 4.0 - Manual (Page 88)

Page | 87 Software User Manual
3.38 Event - Digital Input
Step 2
Step 1
Step 1
Fig. 117. Select Digital Input Module above Event and Action
Configuration window
■
Step 1 Click and highlight Digital Input on the event type list, and click the Insert Event icon.
■
Step 2
Select the input device connected to your PC.
The Digital Inputs are triggered from an external sensor, such as a wall-mounted Motion Detector
or a Door/Window sensor. There are only two states for any Digital Input: On or Off. Because of this,
no advanced configuration is needed.
► Note To use Digital Inputs, you must have a TRP-C28 I/O Module and
a TRP-C08 Communication Module. These modules are not included
by default in EZWatch Pro kits and must be purchased separately. For
additional information you can read the I/O Module settings section of the
manual.