EZWatch Pro 4.0 - Manual (Page 84)

Page | 83 Software User Manual
3.36 Event - Lose Focus
Alarm will be activated when any of the cameras loses focus or has a blurred image.
Fig. 113. Basic tab in Lose Focus Alarm Event Configuration
window
3.36.1 Basic Tab
Enable Event Check the box to activate.
Automatically cancel event when event disappear The alarm/action will be off once the
abnormality is fixed or ends.
Manually cancel event or event last triggered The alarm/action will continue until being
canceled from the Main Console (Start>Open Event Report>Cancel All Events). The user currently
not watching the screen will be notified by the alarm.
Cancel event after time-out XX seconds Enable checkbox and setup the time-out seconds to
cancel the event after the time that you set whatever the events disappear or not.
Activated Period Assign the system to activate during a specified time period.