beautypg.com

Compliance, Verify the contents of the shipping carton, Additional parts and specialty tools required – ETC SmartPack CE Wall Mount User Manual

Page 8

background image

6

SmartPack Wall Mount Installation Manual

Compliance

CE Compliance

EN55015, EN55022B, EN61000-6-2, EN60439-1

Complies with CE Directives 336/83/EEC and 73/23/EEC

Verify the Contents of the Shipping Carton

SmartPack unit with cover attached.

Warning labels. If necessary replace the warning label on your SmartPack unit with the
label displaying the operational language of the installed location.

SmartPack User Manual and Mounting Template.

DMX Cable Preparation Kit with 8-pin connector (4100A1012).

Additional Parts and Specialty Tools Required

4 x 6-8mm (1/4” - 3/8”) bolts or screws, 50-100mm (2 - 4”) long, and suitable wall plugs,
are suggested. Mounting hardware and surface must support 23kg (50 lbs).

Conduit punch, Conduit or bushes 12.7mm (1/2”) diameter

Slotted screwdriver for line terminals

Phillips screwdriver

4.75mm (3/16”) wide slotted-style screwdriver for load terminals

Jeweler’s screwdriver for data terminals

Wire strippers