Connection of induction loop for hearing-impaired – 2N Lift8 v1.6.0 User Manual

Page 74

2.
3.
4.

5.
6.

Insert the hexagon key wrench (included in the delivery) in the hole on the
product bottom edge and turn

(about 10 times) until you feel resistance.

left

The window slides down by itself or with a slight aid, revealing its upper brim.
Tilt the window forward and remove it.
Now you have access to the two corner holes. Put the audio unit (including the
wires) on the cabin wall with the pre-drilled holes. Screw and tighten the audio
unit using the screws (for plywood, chipboard, laminated plastic walls) or short
M4 screws with fan washers (for sheet walls with M4-threaded holes) included in
the delivery to the cabin wall.
Replace the window.
Insert the hexagon key wrench (included) in the hole on the product bottom
edge (window lock screw) and turn

(about 10 times) until the window

right

slides under the panel edge. Tighten slightly.

Connection of induction loop for hearing-impaired

The induction loop for people with impaired hearing is part of the Compact cabin audio
unit. No more accessories are required for the given case.