Before you start, Mounting, Operation – 2N Lift8 v1.6.0 User Manual
Page 56: Product completeness check
56
1.
2.
3.
4.
5.
Operation
This type of
is operated by qualified people (lift maintenance staff,
audio unit
e.g.).
Push the TRIPHONY button to activate voice communication with the other audio
of the same lift. Push and hold the button for over 2 seconds to activate
units
communication with another lift (to display a voice menu and select the required
lift number).
Push the ALARM button to call the control centre, for example. The audio unit
calls the numbers configured in the ALARM memory – set 2 (021–026). The
ALARM button illumination (not required by default) helps you find and activate
the
easily in the dark.
audio unit
When you press the ALARM or TRIPHONY button, the function is called up
immediately. Speak HandsFree or use a handset for better acoustic properties.
Press
for more than 2 s to display the voice menu.
Before You Start
Requirements
Connect a handset supplied by the manufacturer to the
to avoid
audio unit
handset operation error.
Product Completeness Check
Check the product for completeness before installation.
1 audio unit
1 handset
2 wall plugs
2 wall plug screws
7–8 jumpers for common machine room configuration
Mounting
The
is typically mounted on a wall using the wall plugs and screws included
audio unit
in the delivery.
Caution
If no number is specified in the ALARM memory – set 2 (021–026), the
dials the numbers defined in the ALARM memory – set 1
audio unit
(011–016).
Push the ALARM button to call the control room or machine room audio
configured as an intercom.
unit
The ALARM and TRIPHONY buttons shine even at relax.