7 intercom function, Alarm – intercom calls – 2N Lift8 v1.6.0 User Manual
Page 142
142
1.
2.
3.
a.
4.
5.
1.
4.7 Intercom Function
ALARM – Intercom Calls
Press the
ALARM button on any
(except for the machine room
audio unit
set as the control centre) to start the process. Upon the press,
calls
audio unit
L8
the pre-set machine room – control centre
.
audio unit
Press
or
(for longer than 2 s) to answer an incoming call.
When the call is answered by the operator, the
system announcement will be
L8
played.Then, voice connection with the calling
is activated.
audio unit
Press 1 on the machine room
keypad to confirm the received call
audio unit
manually. If Confirmation by pick-up (011–016=2) is configured, it is
unnecessary to confirm the call with DTMF1 (refer to
for details).
The call is time-limited (by the "Caution, the call is ending” message), but can be
prolonged using button 4.
Press
, 5 or # to terminate the call.
Number Setting for Machine Room – Control Centre Calls
Enter before the shaft number to set the machine room number.
#
For example, 011 – #8 means that a call to the machine room
in the shaft of
audio unit
lift 8 is set in ALARM button memory 1.
Setting options:
Service Tool – enter # and the shaft number into parameters 011–016.
Caution
You cannot set up an alarm call to another control centre from the
machine room
that is configured as the control centre. The call
audio unit
is made to the
that is the last to activate the alarm call. If no
audio unit
alarm call was activated on any
, the machine room
audio unit
audio unit
will not call any unit.
Press
on the control centre
to set up a call to the
audio unit
audio
that is the last to activate the ALARM function. Such a call is
unit
processed as TRIPHONY and can be terminated by pressing the TRIPHONY
button on any of the two
s or pressing and holding the
audio unit
button for longer than 2 s on the machine
.
audio unit
If a call is set up to a non-existent machine room
, the Alarm
audio unit
function will not be activated (valid for settings #9, #0). If more numbers
than one are pre-programmed, the non-existent
is skipped.
audio unit