Sip settings – 2N Lift8 v1.6.0 User Manual
Page 196
196
SIP Settings
Every user authorised to use the
must be assigned a SIP
2N Lift8
®
Communicator
line, i.e. an account registered with a SIP provider or the PBX used for login via the 2N
. When you log in to the application, your line will get
Lift8
®
Communicator
registered and you can process the calls coming to your line depending on the 2N
®
configuration. An incoming alarm call will probably dial Dispatcher account
Lift8
number. Dispatcher can then contact Technician if necessary. Refer to S.8,
2N Lift8
®
, for details on these functions. Set the following SIP line parameters in
Communicator
the
menu: SIP server and Registrar server, i.e. the server via which
Communicator
the SIP client will register and calls will be made. Enter the IP address/domain of the
SIP Proxy server: port 5060 is used by default. If your provider uses a different port,
add this port to the Domain parameter behind a colon as shown in the figure below.
Set the Domain to differentiate Proxies within a PBX, Username and provide/PBX SIP
account Password. Registration expiry is the last configurable parameter. Click Save to
confirm the settings.
Users – SIP Settings Menu
Figure:
Caution
Make sure that the SIP line is configured correctly to register your SIP line
and log in to the
application.
2N Lift8
®
Communicator
Contact your network administrator for the SIP line settings.