Mounting, Product completeness check, Electronics mounting – 2N Lift8 v1.6.0 User Manual

Page 44

Text mode
Original mode

2N TELEKOMUNIKACE a.s., www.2n.cz

Product Completeness Check

Check the product for completeness before installation.

The cabin

package contains (assembled):

audio unit

1 electronics board
4 terminals slid onto the board; see the photo
1 jumper slid onto the board; see the cover printing
1 mounting panel
1 speaker connected directly or by cable
1 microphone connected directly or by cable
1 cover with printing
5 tightening straps

Mounting

Electronics Mounting

This

is intended for mounting behind the lift control panel. Typically, the

audio unit

panel is ready for installation as shown in the drawing below:

Figure: Mounting Hole Dimensions for Audio Unit – Cabin Universal

To mount the

, you need 4 electrically spot welded

screws, a

audio unit

sufficiently perforated speaker area and a microphone hole. In emergency, you can fix