Eppendorf AF2200 Plate Reader - Manual (Page 48)

Maintenance
Eppendorf
® PlateReader AF2200
English (EN)
48
8.3 Replacing air filters
8.4 Cleaning
1. Wipe the surfaces with a cloth that has been dampened with a mild detergent.
2. Rub the cleaned surfaces until they are dry.
The air filter must be replaced every six months.
The air filter must be replaced immediately if it is heavily contaminated.
1. Switch off the device.
2. Remove filter grille 1 and dispose of the filter
insert properly.
3. Mount the filter grille with a new filter insert.
DANGER! Electric shock as a result of penetration of liquid.
 Switch off the device and disconnect the power plug before starting cleaning or
disinfection work.
 Do not allow any liquids to penetrate the inside of the housing.
 Do not spray clean/spray disinfect the housing.
 Only plug the device back in if it is completely dry, both inside and outside.
NOTICE! Corrosion due to aggressive cleaning agents and disinfectants.
 Do not use corrosive cleaning agents, aggressive solvents or abrasive polishes.
 Do not incubate the accessories in aggressive cleaning agents or disinfectants for longer
periods.
1