Apple QuickTime VR - Manual (Page 28)

18 Select the image options appropriate for the panorama.
Image Processing
These options determine the types of processing applied to the stitched image. All except
Stretch are selected by default.
m Blend—Softens sharp edges within an image and where images overlap.
m Fill—Fills the edge of the image not covered by pixels from the source images with the
first non-black color identified by the Panorama Stitcher.
m Deskew—Compensates for slight rotation in images that occurs when you capture
the images.
m Sharpen—Sharpens blurry images by increasing the contrast of adjacent pixels.
m Stretch—Stretches the source images as needed so they can be aligned more accurately.
Image Size
m Crop—Removes pixels from the top and bottom of the stitched image to give a clean edge
and hide the boundaries of the original images. It is selected by default.
m Auto Size—Lets the size of the stitched image be determined by the size of the source
images. If you want to specify the size, be sure the Auto Size checkbox is not selected.
Then enter values (in pixels) in the Height and Width boxes.
Important If you are specifying the size, you should check the Tiles setting in the
Compression tab. Height must be a multiple of 4 times the number of vertical tiles. Width
must be a multiple of 4 times the number of horizontal tiles. If you use the default tiling
scheme of 24 vertical tiles and 1 horizontal tile, height must be divisible by 96, and width
must be divisible by 4.
28 Chapter 4