Hale FoamLogix 6.5 - Manual (Page 137)

137 FoamLogix 3.3 / 5.0 / 6.5 Installer / Operations Manual
p/n: 029-0021-68-0
Ope ra tion
❑
5.12 REMOTE ON/OFF SWITCH OPTION
The remote ON/OFF switch is used to activate the Hale FoamLogix system
from the driver compartment or a location other than the control unit. The
switch activates and deactivates the Hale FoamLogix system. It does not
permit adjustment of the injection rate.
(See Section 3, Figure 3-41: “Remote Activation Switch Installation Dimen-
sions,” on page 100.)
To operate:
1. Press the switch down
and release to activate.
The LED illuminates,
indicating the Hale
FoamLogix is in the
STANDBY mode. (See
Figure 5-10: “Remote
Activation Switch.”)
2. When the foam capable
discharge nozzle is
opened the LED
BLINKS, indicating foam
concentrate is being
injected. When the noz-
zle is closed the LED
stops flashing.
3. Pressing the switch again deactivates the Hale FoamLogix system and
the LED shuts OFF. (See Figure 5-10: “Remote Activation Switch.”)
Figure 5-10: Remote Activation Switch