Hale FoamLogix 6.5 - Manual (Page 113)

Se tup and Cal ibration
❑
113 FoamLogix 3.3 / 5.0 / 6.5 Installer / Operations Manual
p/n: 029-0021-68-0
Restoring Factory Defaults
To return to the fac-
tory default values,
enter the restore
factory values
password (
). (See Figure 4-
3: “Password
Sequence.”)
Once the password
is entered cor-
rectly the control
unit displays FAC
and returns to nor-
mal operation.
Factory default val-
ues:
❑ Simulated Flow
-150 GPM (568
LPM)
❑ % FOAM -
0.5% Class “A”
(See Figure 4-4:
“Password and
Calibration Modes
- Display.”)
Calibration
1. To enter a calibration
password, press and
hold the SELECT
DISPLAY button (
i
). The display shows
PASS, then clears.
2. While holding i
pressed, enter the calibration password ( ).
Figure 4-4: Password and Calibration Modes - Display