8 normal operation summary - continued, Read total water or foam solution – Hale FoamLogix 6.5 User Manual
Page 130
❑ Operation
130
FoamLogix 3.3 / 5.0 / 6.5 Installer / Operations Manual
p/n: 029-0021-68-0
Begin Foam Injection.
Establish water flow and press ON
button.
Change Injection Rate.
Read Injection Rate.
Press and HOLD
and
for two
(2) seconds. Release once desired
rate is set.
Press and release
or
. The dis-
play shows the injection rate and
returns to the selected function
after two (2) seconds.
Read Total Water or Foam
Solution.
Press
i
until LED below TOTAL FLOW
illuminates.
Operation
Action
Display
Figure 5-6: Normal Operation Summary Chart
This manual is related to the following products: