Hale ESP Priming System User Manual
Esp primer system, Includes: spv and pvg valves)
Table of contents
Document Outline
- ESP Primer System Manual, p/n: 029-0810-01-0, Rev-A
- NOTICE !
- Contents
- 1 Safety Precautions
- 2 Introduction
- 3 System Installation
- 4 Primer Operation
- 5 System Maintenance
- 6 Troubleshooting
- Pump Loses Prime or Will Not Prime.
- Primer Solenoid - 12VDC and 24VDC
- Switch is dead - no click is heard.
- Switch chatters, pops or clicks, but the motor does not work.
- Switch stays ON (sticks) - motor keeps running.
- Figure 6-1: Troubleshooting Chart
- Figure 6-2: 12VDC Solenoid Arrangement Troubleshooting
- Figure 6-3: 24VDC Solenoid Arrangement Troubleshooting
- Express Warranty
- Drawing Package
- Return HOME Page
- EXIT