Hale RGA - Manual

MGA and RGA SERIES
SPLIT-SHAFT
PTO DRIVE GEARBOX
INSTALLATION MANUAL
All Hale products are quality components: ruggedly designed, accurately machined, precision inspected, carefully assembled and
thoroughly tested. In order to maintain the high quality of your unit, and to keep it in a ready condition, it is important to follow the
instructions on care and operation. Proper use and good preventive maintenance will lengthen the life of your unit. ALWAYS
INCLUDE THE UNIT SERIAL NUMBER IN CORRESPONDENCE.
MANUAL P/N 029-0020-46-0, REV A, © 1996 HALE PRODUCTS, INC., PRINTED IN U.S.A.
09/16/96
Hale Products cannot assume responsibility for product failure resulting from improper maintenance
or operation. Hale Products is responsible only to the limits stated in the product warranty. Product
specifications contained in this material are subject to change without notice.
HALE PRODUCTS, INC. l A Unit of IDEX Corporation l 700 Spring Mill Avenue l Conshohocken, PA 19428 l TEL: 610-825-6300 l FAX: 610-825-6440