Toshiba Gigashot K Series - Manual (Page 81)

Owner’s Manual 57
Hard Disk Camera GSC-K80HE/GSC-K40HE
Selecting the Focus Area (AF Mode)
Use this procedure to specify the area used to set the focus.
1. From the recording menu, use the jog dial to select [AF MODE] and
press the OK button.
2. Use the jog dial to select [CENTER] or [MULTI] and press the OK
button.
POINT
„ In shots such as group photos where there are many subjects, or where
the subject is not in the center of the shot, use the [MULTI] setting to
reduce the likelihood of the shot being incorrectly focused.
The selected AF mode is set and the
recording menu reappears.
To cancel the setting, press the MENU
button.
CENTER : The camera sets the focus
by measuring the distance
to subject in the center of
the shot.
The area used for focusing
is always displayed in the
center of the LCD monitor
screen.
MULTI : The camera determines
which of a number of
points should be used for
measuring the focal
distance.
The focus area is
displayed in the part of the
image used for focusing.
RECORDING MENU
EXIT
METERING MODE
DIGITAL ZOOM
AF ASSIST LIGHT
AF MODE
MULTI
COLOR
AF MODE
CENTER
CANCEL