Toshiba Gigashot K Series - Manual (Page 104)

80 Owner’s Manual
Hard Disk Camera GSC-K80HE/GSC-K40HE
Printing Directly from the Camera Using PictBridge
By using a PictBridge (see “Glossary” p.131) -compatible
printer, you can print directly from the camera without using a PC.
1. From the play menu, use the jog dial to select [PictBridge] and press
the OK button.
2. Use the jog dial to select the still image to be printed and then move the
OK button to or to set the number of prints.
3. When you have finished setting the number of prints, press the OK
button.
4. Use the jog dial to select [OK] and press the OK button.
A printer connection message is displayed.
5. Connect the camera to the printer with the USB cable.
When the connection is completed, the print settings screen appears.
ATTENTION
„ You should connect the AC adapter when printing still images.
If the battery runs flat while images are being printed, printing stops and
the camera automatically turns off. If this happens, connect the AC
adapter or ensure that the battery is fully charged before printing the
images again.
„
The camera is not guaranteed to connect successfully to all
PictBridge-compatible printers.
„
If you disconnect the USB cable while the camera is connected to a
printer, malfunctions may occur.
To move to the previous or next album,
move the OK button to
or
respectively. You can set up to 99 prints
in all.
PLAY MENU
EXIT
VIDEO EDITING
PictBridge
LCD BRIGHTNESS
PROTECT
COPY
101-0107 101-0107
SELECT ALL SELECT ALL
OK OK CANCEL CANCEL
OK
PictBridge
TOTAL
NEXT ALBUM NEXT ALBUM