Toshiba Gigashot K Series - Manual (Page 75)

Owner’s Manual 51
Hard Disk Camera GSC-K80HE/GSC-K40HE
Overwriting Preset Data
This procedure stores new preset data for the current light source.
1. Select [PRESET] and use the jog dial to select [OVERWRITE DATA]
from the menu that appears. Then press the OK button.
2. Position a white subject (a white dish or piece of paper) so that it fills the
displayed frame and press the OK button.
Using Preset Data
This section explains how to use existing preset data.
3. Select [PRESET] and use the jog dial to select [USE DATA] from the
menu that appears. Then press the OK button.
A message is displayed.
A message is displayed and the
camera is then ready to shoot.
WHITE BALANCE
OVERWRITE DATA OVERWRITE DATA
USE DATA USE DATA
OK OK
WHITE BALANCE
DISPLAY A WHITE OBJECT IN DISPLAY A WHITE OBJECT IN
THE CENTER, THEN PRESS THE OK BUTTON. THE CENTER, THEN PRESS THE OK BUTTON.
MEMO
„
When you are setting the white balance, ensure that the subject
(the white dish or piece of paper) completely fills the displayed frame.
The camera reverts to recording mode.
WHITE BALANCE
OVERWRITE DATA OVERWRITE DATA
USE DATA USE DATA
OK OK