Toshiba Gigashot K Series - Manual (Page 154)

130 Owner’s Manual
Hard Disk Camera GSC-K80HE/GSC-K40HE
Error Messages
The messages listed below indicating an error or status may be displayed
on the screen.
Message Explanation
NO CARD There is no SD card inserted.
NO AVAILABLE
MEMORY There is no available space on the specified
drive.
NO IMAGE There are no images on the specified drive or
album.
NO TARGET IMAGE. There are no images required for the operation.
WRITE-PROTECTED
CARD You attempted to write data to a locked card.
PROTECTED IMAGE You attempted to erase or edit a protected
image.
CANNOT RECORD
ANYMORE The number of images in the album has reached
“1,000”.
FILE NUMBER IS
FULL The file numbers have reached “9,999”.
TOO MANY IMAGES The number of images has reached “9,999”.
VIDEOS CANNOT BE
EDITED You attempted to edit a video shot on a different
brand of camera.
CANNOT USE THIS
CARD. The card used is damaged or incompatible.
THIS CARD IS NOT
FORMATTED. The SD card used is not formatted or is
formatted using NTFS.
NOT APPLICABLE
FOR PictBridge. The connected printer does not support
PictBridge.
PRINTER ERROR A printer error occurred during PictBridge
connection.
NO INK The printer is out of ink.
NO PAPER The printer is out of paper.
PAPER ERROR An error occurred with paper during printing.
AN ERROR
OCCURRED.
DISCONNECT USB
CABLE. An error occurred during USB connection.
STORING
INTERRUPTED The media stopped for a set time during
recording and recording was interrupted.