Toshiba Gigashot K Series - Manual (Page 34)

10 Owner’s Manual
Hard Disk Camera GSC-K80HE/GSC-K40HE
Turning the Camera On and Off by Sliding the POWER Switch
Sliding the POWER switch turns the
camera on and off.
MEMO
„ If the camera is not used for a set period of time, it automatically
turns off to avoid wasting battery power. This is called the Auto power
off (
p.95).
„ If you load the battery or connect the AC adapter without correctly
shutting down the camera first, the camera may not operate correctly.
If this occurs, turn the camera off and on again.
„ To forcibly turn off the camera when there is a problem such as a
system error, push the reset switch on the bottom of the camera. Note
that this may result in the loss of any files that are being created.
Settings such as the date and time may also revert to their default
values. In this event, reset the settings before using the camera again.
IMPORTANT
„
If you slide the battery lock lever when an AC adapter is not connected,
the power will automatically go off.