Shooting with natural color tones (white balance) – Toshiba Gigashot K Series User Manual
Page 74
50
Owner’s Manual
Hard Disk Camera GSC-K80HE/GSC-K40HE
Shooting with Natural Color Tones (White Balance)
When you take pictures under a range of different light sources, you can
use the white balance (see “Glossary”
p.131) setting to obtain more
natural-looking colors.
1. From the recording menu, use the jog dial to select [WHITE BALANCE]
and press the OK button.
2. Use the jog dial to select the white balance and press the OK button.
POINT
If the stored white balance setting is unsuitable, you can use presets to
manually set the white balance.
ATTENTION
If you use a setting other than [AUTO] and the selected setting does not
match the light source, the color tones may appear unnatural.
If you selected [PRESET], proceed to
“Overwriting preset data” or “Using
preset data”. If you selected another
setting, the camera reverts to recording
mode.
To cancel the setting, press the MENU
button.
AUTO
: Automatic adjustment
SUNLIGHT
: For recording in sunlight
CLOUD
: For recording under cloudy skies
FLUORESCENT
LIGHT H
: For recording under daylight fluorescent lights
(fluorescent lights with a bluish cast)
FLUORESCENT
LIGHT L
: For recording under neutral fluorescent lights
(fluorescent lights with a reddish cast)
INCANDESCENT
LAMP
: For recording under incandescent lights
PRESET
: Presets (using data stored by the user)
RECORDING MENU
EXIT
VIDEO QUALITY
CONTINUOUS RECORDING
IMAGE STABILIZATION
WHITE BALANCE
AUTO
WIND NOISE REDUCTION
AUTO
OK
OK
CANCEL
CANCEL