Shooting video – Toshiba Gigashot K Series User Manual
Page 46

22
Owner’s Manual
Hard Disk Camera GSC-K80HE/GSC-K40HE
Shooting Video
This section describes how to shoot a video. Sound is also recorded in the
video.
1. Press the mode button to select recording mode .
The
icon appears on the top-left corner of the screen during video
recording.
If the LCD monitor is too bright or too dark, adjust the monitor
brightness.
See “Changing the LCD Brightness”
2. Press the REC
button.
Check that the battery is loaded in the camera and that you have removed
the lens cap. Then open the LCD monitor to turn the camera on.
Use the grip belt to avoid dropping the camera.
The camera starts shooting the video. Press
the REC
button again to end video
recording.
The front LED lights during video recording.
0158
0158
08:17:26
08:17:26
DISPL
DISPLAY
IMPORTANT
Do not disconnect the AC adaptor, slide the battery lock lever, or
remove the battery or SD card while the camera is in operation. Doing
so may damage the camera, hard disk drive and/or SD card, and may
corrupt the data stored on the hard disk drive or SD card.
Avoid low temperature-burns when using the camera for long periods of
time. The camera can get hot, especially when used in hot
environments. For long periods of shooting, the use of a tripod is
recommended.