System, Using the hard disk drive protection function – Toshiba Gigashot K Series User Manual
Page 124

100
Owner’s Manual
Hard Disk Camera GSC-K80HE/GSC-K40HE
System
Using the Hard Disk Drive Protection Function
This is a hard disk drive protection function that operates when the camera
is dropped in any way. A sensor detects the fact that the camera has been
dropped and stops any data writing to the hard disk drive.
1. From the setup menu, use the jog dial to select [SYSTEM] and press
the OK button.
2. Use the jog dial to select [HARD DISK PROTECTION] and press the
OK button.
3. Use the jog dial to select [ON] or [OFF] and press the OK button.
ATTENTION
Sudden camera movements during filming or while you are riding in a
vehicle can trigger the sensor and stop the camera shooting.
The system menu appears.
The selected option is set and the
system menu reappears.
ON :
Hard disk drive protection is
enabled.
OFF :
Hard disk drive protection is
disabled.
When [HARD DISK PROTECTION] is
set to [OFF], if the camera is
accidentally dropped, it is very likely to
damage the hard disk drive.
SETUP
EXIT
SOUND
SYSTEM
DATE AND TIME SETTING
LANGUAGE
HARDDISK PROTECTION
CANCEL
ON
OFF
HARDDISK PROTECTION
CANCEL
ON
OFF