Toshiba Gigashot K Series - Manual (Page 56)

32 Owner’s Manual
Hard Disk Camera GSC-K80HE/GSC-K40HE
Erasing Images (Erase one Image)
This section describes how to erase images one at a time. Note that you
cannot use this method to erase protected images (
p.75), or images
stored on a locked SD card ( p.xxiv).
1. Press the MENU button.
2. Use the jog dial to select [ERASE] and press the OK button.
3. Select [ERASE ONE IMAGE] and press the OK button.
4. Use the jog dial to select the image to be erased.
5. Move the OK button to to select [YES] and press the OK button.
ATTENTION
„
Erased images cannot be recovered.
In Auto mode, the MENU button cannot
operate.
Exit Auto mode or select playback mode
to display menu.
The image is erased and the next image
appears.
If you do not want to erase the selected
image or if you want to cancel image
erasing, select [NO] and press the OK
button.
You cannot erase a protected image.
Select [NO] and press the OK button.
RECORDING MENU
EXIT
DRIVE & ALBUM
CONTINUOUS RECORDING
ERASE
VIDEO QUALITY
CANCEL
ERASE
ERASE ONE IMAGE
CANCEL
ERASE
102-0100 102-0100
ERASE THIS IMAGE. ERASE THIS IMAGE.
YES
NO