Toshiba Gigashot K Series - Manual (Page 80)

56 Owner’s Manual
Hard Disk Camera GSC-K80HE/GSC-K40HE
Selecting the Metering Mode
Use this procedure to specify the metering mode used for exposure
calculation.
1. From the recording menu, use the jog dial to select [METERING
MODE] and press the OK button.
2. Use the jog dial to select [CENTER WEIGHTED] or [SPOT] and press
the OK button.
POINT
„
Using the [SPOT] setting for backlit subjects enables you to match the
exposure for a specific subject.
ATTENTION
„ If the metering point is too bright, the photographed image will be dark.
„
If the metering point is too dark, the photographed image will be
washed out.
The selected metering mode is set and
the recording menu reappears.
To cancel the setting, press the MENU
button.
CENTER
WEIGHTED : The camera sets the
exposure by metering the
entire image but with
particular emphasis on
the central part of the
image.
SPOT : The camera sets the
exposure by metering
just a very small area at
the center of the image.
RECORDING MENU
EXIT
DIGITAL ZOOM
MIC. SENSITIVITY
AF MODE
METERING MODE
SPOT
AF ASSIST LIGHT
METERING MODE
SPOT
CANCEL