Toshiba Gigashot K Series - Manual (Page 139)

Owner’s Manual 115
Hard Disk Camera GSC-K80HE/GSC-K40HE
Backing up Camera Images to a PC
When the camera is connected to a PC with the USB cable, new recorded
images will be transferred to the PC automatically.
Install ImageMixer™ 3 and Nero Vision 5 from the supplied CD-ROM first.
See “Installing the Software” ( p.112).
Connect the camera and PC and turn the power on.
1. Connect the camera and PC with the USB cable.
The new recorded images will be transferred to the PC automatically.
The transferred images will be marked.
2. When image transfer is completed, ImageMixer™ 3 will start.
MEMO
„ The connection between the camera and the PC is monitored by the
“Camera Monitor”. If any other connection monitoring tool is running, it
may interfere with the correct operation of the “Camera Monitor”. When
you connect the camera to the PC, shut down any other monitoring
tools.
USB
Connecting to a PC
To the USB port