Toshiba Gigashot K Series - Manual (Page 116)

92 Owner’s Manual
Hard Disk Camera GSC-K80HE/GSC-K40HE
Changing the Basic Camera Settings
This procedure specifies the underlying settings that apply when you use
the camera, and is referred to as Setup.
These settings are retained when the camera is turned off or Auto power off
is activated.
1. Press the MENU button.
2. Use the jog dial to select [SETUP] and press the OK button.
3. Use the jog dial to select a menu and press the OK button.
4. Use the jog dial to select the desired setting and press the OK button.
The selected setting is set and the setup menu reappears.
5. To exit the setup menu, press the mode button to select the desired
mode.
Button Operations during Setup Menu Setting
The settings for the selected menu
appear.
Screen
Button/lever Menu displayed Setting displayed
OK Confirms the selected setting
OK button Selects a menu setting Selects a setting
OK button Selects a menu setting Selects a setting
OK button Confirms the selected
setting
-
OK button Returns to the recording
menu or play menu
Returns to the previous
screen
Jog dial right Selects a menu setting Selects a setting
Jog dial left Selects a menu setting Selects a setting
RECORDING MENU
EXIT
LCD BRIGHTNESS
SHARPNESS
DRIVE & ALBUM
SETUP
SETUP
EXIT
SYSTEM
AUTO POWER OFF
SOUND
ON
LCD-LINKED POWER