Inserting and removing sd cards, Inserting an sd card, Removing an sd card – Toshiba Gigashot K Series User Manual
Page 32
8
Owner’s Manual
Hard Disk Camera GSC-K80HE/GSC-K40HE
Inserting and Removing SD Cards
Inserting an SD Card
1. Open the SD card cover.
2. Insert the SD card into the SD slot, ensuring that the card is facing in
the right direction (as shown below).
Removing an SD Card
1. Push the card into the slot once so that it springs out slightly. Then
slowly pull it out of the slot.
Close the SD card cover after removing the SD card.
Turn the camera off before inserting or removing an SD card (sold
separately).
With the notch facing to the left (towards
the lens), push the card firmly all the way
into the slot.
Check that the SD card is pushed fully and
securely into the slot and then close the
SD card cover.
To have images you shoot recorded on an
SD card, you should insert an SD card for
that purpose before taking images.
See “Selecting an SD Card as the Save
Location and Creating Albums”
IMPORTANT
Never remove the SD card while the MEDIA LED is lit. Doing so could
corrupt the data on the SD card or damage the SD card itself.
The first time you use an SD card, or when using an SD card that has
been used on another device, always format the card in the camera
before recording.
This camera does not support the MultiMediaCard™ format.