Toshiba Gigashot K Series - Manual (Page 125)

Owner’s Manual 101
Hard Disk Camera GSC-K80HE/GSC-K40HE
Resetting the System
This option returns the camera settings to the values specified at the time
of purchase (factory default). Note that this does not reset the settings for
Drive & Album, the white balance presets, or language and date and time
settings.
1. From the setup menu, use the jog dial to select [SYSTEM] and press
the OK button.
The system menu appears.
2. Use the jog dial to select [RESET] and press the OK button.
3. Use the jog dial to select [YES] and press the OK button.
IMPORTANT
„
Even when hard disk drive protection is enabled, mishandling the
camera can result in damage to the hard disk drive and/or the loss of
saved data. Hard disk drive protection does not guarantee the safety of
the hard disk drive or the data stored on it.
„
If the camera detects that it has been dropped and stops access to the
hard disk drive, the “HARD DISK DRIVE CANNOT BE ACCESSED”
message appears. Turn the camera off and then on again.
„
If the camera detects that it has been dropped during video recording
and stops access to the hard disk drive, the video file may be created
incorrectly and you may not be able to play it back. In this event, you
should erase the video.
A confirmation message appears.
When the reset is completed, the
system menu reappears.
RESET
CANCEL
NO YES
ALL SETTINGS WILL BE
RESTORED
TO THEIR DEFAULTS.
RESET