Olympus C-5050 Zoom User Manual
Page 88
87
External flash (optional)
5
Fla
sh
2
In the top menu, select MODE
MENU
→
→
→
→ CAMERA →
→
→
→ FLASH.
To use the external flash only
→ Select
, then press
. To exit the
menu, press
again.
To use the external flash together with
the main flash
→ Select IN+
, then press
. To exit
the menu, press
again.
3
Turn on the external flash.
• The mode for the external flash is TTL-
AUTO.
• When the shutter button is pressed
halfway, the external flash begins
communicating with the camera and
automatically switches to TTL-AUTO.
During communication, the camera’s
monitor is turned on and TTL-AUTO is
displayed.
4
Select the flash mode by turning
the jog dial while holding down
.
• If close-up pictures are overexposed, try using the main flash by
itself.
• When the main flash and the FL-40 are used together, the main
flash is used as the compensating light source. This means that if
the amount of light from the FL-40 is insufficient (beyond its working
range), the resulting pictures may be underexposed.
Note