Olympus C-5050 Zoom - Manual (Page 53)

52
Zoom
2
Sh
oot
ing an
d play
bac
k ba
sics
6
Press to select ON, then
press .
• Press again to exit the menu and the
subject is displayed on the monitor.
7
Turn the zoom lever toward T.
• The white area of the zoom indicator
indicates the optical zoom. If the digital
zoom is set to ON, a red area appears on
the zoom indicator. When you reach the
limit of the optical zoom, the digital zoom is
enabled.
• In mode, the maximum digital zoom magnification is 2.5x.
• Pictures taken with the digital zoom may appear grainy.
• Camera movement is likely to occur at higher magnifications.
Stabilize the camera with a tripod, etc. to avoid camera movement.
• Turning the monitor off cancels the digital zoom. However, if the
digital zoom is set to ON, it will be automatically enabled the next
time you turn the monitor on.
CARD
SEt
PIC
CAMERA
NOISE REDUCtION
DIGItAL ZOOM
FULLtIME AF
AF MODE
OFF
ON
The cursor moves up and down on
the zoom indicator according to the
zoom magnification.
The cursor turns orange when
inside the digital zoom field.
Note