Olympus C-5050 Zoom - Manual (Page 65)

64
Direct Buttons
3
Mod
e dial an
d dire
ct
b
u
tt
on
fu
n
ct
io
n
s
Flow of direct button operations
The procedure for making settings using the direct buttons and jog dial is
shown below. As the setting screens are displayed on the monitor when
pressing the direct button, settings can be made by following the operation
guide displayed at the bottom of the screen.
Ex: Using the flash mode button
1
Turn the jog dial while holding down to select the flash
mode.
• The monitor turns on and the setting screen is displayed.
• The setting is made at the moment you release your finger from the
direct button, and the monitor turns off.
2
Press while holding
down to display the
menu.
Release the direct
button after the menu is
displayed.
3
Press to select the desired item, then press .
FLASH MODE
AUtO
SEt
Operation guide:
Displayed when further options are
available.
GO SELECt
SLOW
SLOW1
SLOW
SLOW2
CANCEL
Operation guide:
Possible operations are displayed.