Olympus C-5050 Zoom - Manual (Page 130)

129
7
A
d
jus
tin
g
t
h
e i
m
ag
e q
u
alit
y
an
d ex
pos
ur
e
3:2 Resolution
The image aspect ratio is normally 4:3. If the
aspect ratio is changed to 3:2, the image can be
printed at a photo lab without losing the image
borders. When
is activated, the resolution
is 2560 × 1696 pixels. You can select in
the TIFF, SHQ or HQ mode. is not
available in mode.
The monitor turns on automatically when
is selected. Check the shooting range on the
monitor before taking the picture.
ENLARGE SIZE
When ENLARGE SIZE is selected, the actual 5 million pixels used by this
camera can be increased to the equivalent of approx. 8 million pixels (3200
×
2400). This allows you to make quality prints in larger sizes, such as A3
(297 mm
× 420 mm/11.7'' × 16.5''). However, file sizes also become larger.
ENLARGE SIZE can be selected in the SHQ or HQ mode. It is not available
in
mode.
• If the SHQ record mode is set to ENLARGE SIZE, the maximum
number of pictures in high speed sequential shooting mode is 3.
RAW Data
As its name suggests, RAW data is unprocessed image data in its original
state to which white balance, sharpness, contrast, color conversion and other
processes have not been applied. CAMEDIA Master software is required to
display RAW data as images. Plug-in software for playback by Photoshop
can also be used. (Available for download from the Olympus home page.)
You cannot display RAW data using ordinary software or make print
reservations for them.
Pictures taken with the RAW data format can be edited on this camera.
“RAW editing” (P.156)
Monitor indications
when is set 3:2
3:2
3:2
3:2
3:2
Note